The Truth about Boat Propellers. Part 2 - My hub kit slips on impact
Don't trust any hub kit to "give" when you hit something.
Some top OEM engine manufacturers will claim that if you hit a solid object underwater, the hub will slip and protect your engine. That notion is common among boaters today. The fact is that they are wrong! Sure, sometimes when you hit something hard, you're hub will indeed slip. Your prop will be destroyed, and many times so will your gearcase/lower unit.
To confidently rely on your hub kit to protect your drive is not a good idea. Mercury shows a diagram on their box, illustrating the break point of their hub so that your drive will be protected upon impact. They boast this information to many of their customers. This is a down right lie by a major corporation. Does the Merc hub slip? Sure. Often times when you definetely do not want it to - gunning the throttle, hopping big waves, or just cruising around. It is my strong opinion that Mercury and other manufacturers claim their hubs are fail safe to cover themselves for such a high failure rate under normal conditions.
The holds true with the rubber hub. Rubber is indeed soft and has some give. But how can any hub be smart enough to stay intact under extreme torque conditions of hitting the throttle hard, pulling a skier, hopping a wave, but at the same time "slip" under impact. It is simply not true.
Here are the facts:
Most aluminum propellers will sacrifice themselves under impact, saving the lower unit. Stainless steel props are less forgiving, thus if you hit a solid enough object under water, it will very likely cause damage to your lower unit - regardless of which hub you have.
Still skeptical? Ask any marine service center how many repairs they have done as a result of the boater hitting an object underwater. I'm sure that number will be substantial. Another fact: almost all of those propellers had either a rubber hub or Mercury style hub or any other hub inside of them. What happened to the claimed protection for your lower unit?
Don't get me wrong, I'm sure that some boaters' hubs did actually slip on impact and possibly save their drive, but that is not the norm and you should never rely on that to happen for you.
The next time you buy a boat propeller, ask the seller or even the manufacturer about their hub.
Peter Sagartz
eBuyersWorld.com
Wednesday, June 27, 2007
Monday, June 25, 2007
The Truth about Boat Propellers. Part 1 - Composite Propellers.
The Truth about Boat Propellers. Part 1 - Composite Propellers.
Composite is not better than aluminum
There is a myth about composite propellers. After being a serious boater for over 15 years and haven run and tested hundreds of props on many different boats, I've learned a few things about props.
There is a myth about composite propellers: "Composite propellers run better that aluminum props and almost as good as stainless steel propellers." If you believe that one, I have some snake oil to sell you.
First I will start with the fact that different aluminum props from various manufacturers will have a major difference in overall performance between the best prop and the worst prop. On a good day a composite propeller will perform as well as the worst aluminum prop.
It is simply the fact that there has not been a composite propeller manufacturer that has designed a propeller that performs well. These composite props lack in rake, cupping, pitch progression and blade area. Many boaters claim that their composite prop runs better than their aluminum. However, most of these boaters replaced 3-blade aluminum prop with 4 blade composite. For some boat uses a 4 blade prop is better than a 3 blade. I'll get into that in another section. Some of these claim of better composite performance is because they were propped wrong with their aluminum and finally bought the right pitch in composite.
Many composite propellers use a gimic in their design. One manufacturer has removable blades, another has a variable pitch adjustment, and others try to sell their props the old fashioned way.
The real way to understand the composite performance myth is to put it to the test yourself. But do it right, compare apples to apples. Take the best known performing composite prop you know of and pin it against a leading aluminum prop. If you're looking at an aftermarket aluminum propeller, Turning Point Propellers' Hustler prop is the best. Or in the original equipment side of it, run a Mercury prop. They make them to fit all applications, just like Turning Point. Put it to the test and you'll understand what I'm talking about.
Check back soon as I'll comment on other areas on boat propellers.
Peter Sagartz
eBuyersWorld.com
Composite is not better than aluminum
There is a myth about composite propellers. After being a serious boater for over 15 years and haven run and tested hundreds of props on many different boats, I've learned a few things about props.
There is a myth about composite propellers: "Composite propellers run better that aluminum props and almost as good as stainless steel propellers." If you believe that one, I have some snake oil to sell you.
First I will start with the fact that different aluminum props from various manufacturers will have a major difference in overall performance between the best prop and the worst prop. On a good day a composite propeller will perform as well as the worst aluminum prop.
It is simply the fact that there has not been a composite propeller manufacturer that has designed a propeller that performs well. These composite props lack in rake, cupping, pitch progression and blade area. Many boaters claim that their composite prop runs better than their aluminum. However, most of these boaters replaced 3-blade aluminum prop with 4 blade composite. For some boat uses a 4 blade prop is better than a 3 blade. I'll get into that in another section. Some of these claim of better composite performance is because they were propped wrong with their aluminum and finally bought the right pitch in composite.
Many composite propellers use a gimic in their design. One manufacturer has removable blades, another has a variable pitch adjustment, and others try to sell their props the old fashioned way.
The real way to understand the composite performance myth is to put it to the test yourself. But do it right, compare apples to apples. Take the best known performing composite prop you know of and pin it against a leading aluminum prop. If you're looking at an aftermarket aluminum propeller, Turning Point Propellers' Hustler prop is the best. Or in the original equipment side of it, run a Mercury prop. They make them to fit all applications, just like Turning Point. Put it to the test and you'll understand what I'm talking about.
Check back soon as I'll comment on other areas on boat propellers.
Peter Sagartz
eBuyersWorld.com
Thursday, June 21, 2007
Aluminum Propellers
Not all props are created equal. There is a huge difference between what an average propeller and a high performance prop can do to the overall performance of your boat. Turning Point's Hustler aluminum propellers provide the added performance that boater's crave.
Mid-Range & High Performance Series
40 - 300 hp w/ 4-1/4" & 4-3/4" gearcases
They incorporate designs that boost a boat's overall performance. Not all boat propellers are created equal. In fact, Hustler Aluminum Propellers are the best performing props available. In some cases, this prop will outperform a stainless steel propeller!
Turning Point's Hustler High Performance Series aluminum propellers now feature the newly designed MasterGuard Hub System. Created specifically to give boats a higher top-end speed, better handling, a faster hole shot and more efficiency, Hustler propellers maximize overall performance. These props incorporate the same high performance designs found in stainless steel props to give boaters a less expensive way to gain stainless steel-like performance.
The High Performance Series is designed for all engines ranging from 40 hp to 300 hp with 4-1/4" to 4-3/4" gearcases. The interchangeable hub allows boaters to save money on future prop purchases, since spare or different pitched propellers don't require another hub purchase.
Turning Point recommends that every boat have a spare propeller onboard to insure a day on the water isn't ruined by a broken prop or to allow for adjustments in different situations. Using a prop 2" in pitch less makes a big difference when more people are onboard or the boat is being used for watersports. The smaller pitch helps offset the added weight and drag on the motor and increases performance under these circumstances.
Tuesday, June 19, 2007
Unique designs give better propeller performance
Hustler Mid Range and High Performance aluminum propellers are also unique. The Mid Range boat propeller series offers increased blade area so work boats, pontoons, and jon boats can perform better. Hustler Mid Range propellers offer increased fuel economy, faster speeds and better handling over original equipment aluminum propellers. The Hustler High Performance series aluminum boat propellers share similar design patterns to that found in stainless steel propellers. The increase rake, pitch progression, blade area and cupping provide stainless steel-like performance from an aluminum boat propellers. The MasterGuard Hub system also allows boaters to easily change their boat propeller to a lower pitch. This will make pulling a skier or adding extra people on board easier with a lower pitch boat propeller. Hustler aluminum boat props were also approved by the North American Fisherman field testers.
Click here for more information on boat propellers
Click here for more information on boat propellers
Monday, June 18, 2007
Express Stainless Steel Boat Propellers
Welcome to the Express Stainless Boat Propellers Information Page. These high performance stainless props provide great all around performance.
Click here to use our Prop Wizard to help you find the right prop.
Express High Performance Stainless Boat Propellers
High Performance Series
75 - 300 hp w/ 4-1/4" & 4-3/4" gearcases
Express props are the perfect prop for bass, walleye, family fishing, offshore boats, run-a-bouts, and weekenders. Express gives boats maximum speed and secure handling on tight turns at wide open throttle.
The Express stainless steel propeller from Turning Point Propellers provides all-around high performance for everyone from pro fishermen to weekend boaters. This stainless steel prop is ideal for just about any engine from 40 to 300+ hp with a 4-1/4" or 4-3/4" gearcase.
Delivering maximum speed and secure handling on tight turns at wide open throttle, the Express propeller is perfect for bass, walleye, family fishing, offshore and runabout boats. The unique blade design, available in 15", 17", 19", 21" or 23" pitches, allows for versatile use and gives boats a quicker hole shot, faster time to plane and greater lift.
At the heart of the Express prop housing is Turning Point's redesigned MasterGuard interchangeable hub system. Smaller and stronger, the hub utilizes a high-tech polymer material that efficiently absorbs damaging shift shock and engine vibrations. The small diameter allows optimal exhaust flow for better fuel efficiency and peak horsepower.
Do you use your boat for waterskiing, tubing, or putting extra people on board for a cruise around the lake or down the river? Purchase a 2 nd propeller at a lower pitch to help compensate for the added weight and drag. You will notice a big improvement in how your boat performs under those conditions. Don't forget you can carry a spare Hustler aluminum propeller that will adapt to the same hub.
Click here to use our Prop Wizard to help you find the right prop.
Express High Performance Stainless Boat Propellers
High Performance Series
75 - 300 hp w/ 4-1/4" & 4-3/4" gearcases
Express props are the perfect prop for bass, walleye, family fishing, offshore boats, run-a-bouts, and weekenders. Express gives boats maximum speed and secure handling on tight turns at wide open throttle.
The Express stainless steel propeller from Turning Point Propellers provides all-around high performance for everyone from pro fishermen to weekend boaters. This stainless steel prop is ideal for just about any engine from 40 to 300+ hp with a 4-1/4" or 4-3/4" gearcase.
Delivering maximum speed and secure handling on tight turns at wide open throttle, the Express propeller is perfect for bass, walleye, family fishing, offshore and runabout boats. The unique blade design, available in 15", 17", 19", 21" or 23" pitches, allows for versatile use and gives boats a quicker hole shot, faster time to plane and greater lift.
At the heart of the Express prop housing is Turning Point's redesigned MasterGuard interchangeable hub system. Smaller and stronger, the hub utilizes a high-tech polymer material that efficiently absorbs damaging shift shock and engine vibrations. The small diameter allows optimal exhaust flow for better fuel efficiency and peak horsepower.
Do you use your boat for waterskiing, tubing, or putting extra people on board for a cruise around the lake or down the river? Purchase a 2 nd propeller at a lower pitch to help compensate for the added weight and drag. You will notice a big improvement in how your boat performs under those conditions. Don't forget you can carry a spare Hustler aluminum propeller that will adapt to the same hub.
| Boat: | Caravelle 18 | ||||
| Motor: | MerCruiser® 4.3L | ||||
| Engine WOT Range: | 4400-4800 | ||||
| Propeller | Top Speed | WOT RPM | Handling | ||
| Express® 19 pitch | 43.2 | 4600 | 5 | ||
| Power Tech® 19 pitch | 43.1 | 4600 | 5 | ||
| Mercury® Laser® 19 pitch | 42.7 | 4700 | 5 | ||
| Solas® 19 pitch | 43.0 | 4800 | 5 | ||
| Michigan Wheel® 19 pitch | 42.8 | 4800 | 5 | ||
| Handling Score | |||||
(Best) 5 | Prop holds throughout the turns. | ||||
4 | Ventilate after apex of the turns. | ||||
(Acceptable) 3 | Ventilates at apex of the turns. | ||||
2 | Light ventilation throughout the turns. | ||||
1 | Excess ventilation through out the turns and after the turns. | ||||
| 0 | Blow out, can't turn at all. Need to back off the throttle. | ||||
Sunday, June 17, 2007
Turning Point Propellers performance upgrade
Overview:
True High Performance Aluminum and Stainless Steel Boat Props from Turning Point. But what makes a boat propeller High Performance? The secret is in the blade design. Turning Point Propellers uses a sophisticated, scientific method in its designs. Variables such as rake, pitch progression, cupping, blade area and blade thickness of the blades all come into play. If a propeller is tuned correctly taking into account these variables, it will dramatically increase the overall performance.
But how can these marine propellers perform better than OEM props if they design them for their motors? It's relatively easy. Turning Point tests the performance of all boat props and makes sure that they run better than OEM and aftermarket props. Of course a Turning Point may not run the fastest on every boat, but to say it is the fastest 9 times of 10 is fair. Turning Point designs its aluminum and stainless steel boat propellers to not only run fast, but also provide superior handling on sharp turns at high speeds. Once you get your new Turning Point prop, give it a good strong test, and you'll see and feel the difference. Read the testimonials from boaters like yourselves. Feel free to email us with any testimonials of your own!
Testimonials:
Here's what boaters are saying about these propellers:
JUST WANTED TO TELL YOU GUYS WHAT A GREAT PROP YOU MAKE. I HAVE BEEN GOING CRAZY TRYING TO FIND A PROP THAT GETS MY 140HP JOHNSON 4 STROKE IN THERIGHT W.O.T. RANGE
THANK YOU.
2005 MANITOU OSPREY PRO SERIES 24 FOOT PONTOON BOAT
But how can these marine propellers perform better than OEM props if they design them for their motors? It's relatively easy. Turning Point tests the performance of all boat props and makes sure that they run better than OEM and aftermarket props. Of course a Turning Point may not run the fastest on every boat, but to say it is the fastest 9 times of 10 is fair. Turning Point designs its aluminum and stainless steel boat propellers to not only run fast, but also provide superior handling on sharp turns at high speeds. Once you get your new Turning Point prop, give it a good strong test, and you'll see and feel the difference. Read the testimonials from boaters like yourselves. Feel free to email us with any testimonials of your own!
Testimonials:
Here's what boaters are saying about these propellers:
B. Bessent.
Wow! It seems like a new boat! The old prop pushed the boat through the water like it was mud. I never could pull a skier. The new (Turning Point) prop pulled two skiers like nothing."
Bayliner 16’
Force 70hp, Hustler 15 pitch propeller
L. Miller.
The hole shot seems much better than the factory prop. Holds well in turns and is easy to install. Appears very sturdy & well designed with bigger than factory blades. I would choose this prop over the factory prop. I will leave this prop on my boat and use the factory prop as a spare.
Starcraft 16
Mercury 60 EFI, Hustler 14 pitch
R. Hanson.
“I was very impressed with the torque I felt with the Turning Point prop. The increase in power and smoothness was very noticeable. Easy installation. Great in turns, a lot better than the stock prop."
SmokerCraft 17
Johnson 115, Hustler 19 pitch
P. Bologna.
“The holding with the Turning Point prop is awesome!"
G3, Yamaha 90hp, Hustler 17 pitch
M. Gelfond.
“Having worked in the tool and dye industry for the past 25 years, I must say that this prop is one of the finest quality."
SeaRay 17, Mercruiser, Hustler 17 pitch
A. Rognervo.
"The Turning Point Hustler prop felt solid throughout the performance test. I'd say it compares favorably with my stainless steel prop. I did experience a bit of speed loss, however no speed loss with an additional passenger. I did get to plane faster with the test (Hustler) prop."
Hustler 17 pitch
D. Scheunemann.
"Turning Point test prop: planed the boat quicker with a faster hole shot. This is a very good prop."
Alumnacraft 163, Mercury 60, Hustler 14 pitch
J. Hedstrom.
"The boat feels like a bullet with the Turning Point prop. It's a higher, drier ride."
N. Treida. Flower Mound, TX
”The Turning Point prop put the boat on plane faster than my stainless steel prop. Top speed/rpm was identical, but I got there faster with the Turning Point prop! I definetely recommend this prop."
Sylvan 16, Yamaha 55hp
Hustler 13 pitch propeller
D. Tomlinson.
“I was extremely satisfied with the performance of the prop. My standard Merc prop will now become my backup prop. I have already told 3 boaters of these results, they were also impressed. I also made a third run with another person in the boat and the boat still ran 45 mph @ 5200 rpm's. “
Lund Pro Sport 17, Mercury 115, Hustler 19 pitch
New Jersey
"I am a customer who you recently bought a used Hustler Propeller 23 pitch, going to
Reason, for writing you this e-mail is two -fold.
(1) The propellers work as per your companies claims and are a real value. Customer service and support, top notch.
(2) I wish a big retailer would start carrying these props, WEST Marine, BOAT US. Boaters World, made a big mistake by dropping your line.
Please, feel free to pass this message onto any buyer who may not feel that your props live up to your company claims. I have a perfect example of the average boat most people own and the advantage of this prop, value and performance.
Boat: 1998 Four Winns RS ( 18ft sport model)
Engine: 5.0 Volvo ( 220 H.P.)
Outdrive: Volvo SX
With standard OMC prop: 23 pitch topped out @ 49 MPH ( W.O.T.)
With Hustler Aluminum 23 pitch tops out @ 56 MPH ( W.O.T.)
The boat gets on plane faster and definitely feel the boat pulling much harder out of the hole. I am sure this is because of the cupped blades. Turning, on a dime. OMC, could not hold into a turn like this prop.
I use my boat in a river, that drops into bay and eventually leads out to the ocean where I go as far as 10 miles outside. This is
Keep up the good work guys. Love your product and great service."
K. Keist
“You might be interested to know that my time to plane is definitely shorter with a noticeable decrease in the amount of bow rise. To top it off I’ve seen top speeds I can’t even believe. It was 43.7 mph with and with the Hustler it is now 48.9 mph. This is definitely a High Performance Aluminum propeller, the likes of which I’m surprised someone has not come up with before now.”
G.
Dayton
“After ordering and installing Turning Point’s hub and prop on my 1995 outboard motor, I compared it to the original prop. I not only gained 3 mph top end speed, but it was also quicker to get on plane. It is a very good-looking unit and very easy to install. I bought a second prop to use
as a spare. Both the hub and prop cost me about $62.00 less than the original prop.”
K.
“The Express prop I bought completely outperformed my OEM prop. My hole shot improved and the top speed was faster by about 3 mph. I couldn’t believe how well it handled on turns.”
S. Graham
“The 23 pitch Hustler aluminum prop was outstanding in both the hole shot and top end speed. I was amazed that a prop could perform like it did.”
D. Banach.
“Just thought I would relate my experience with the HU1421A propeller as you recommended for my 2000 Marada 184 DLX with 3.0 Mercruiser versus my original propeller. The biggest difference I noticed was at cruising RPM of 3500 with the old prop boat speed was 26 mph and
with the Hustler the speed is now 31 mph.”
E. Dye
“I bought a SpeedZone prop and think it is the best money can buy. I have been fishing in bass tournaments as a professional for over 10 years and have been running performance bass boats for at least 15 years and I know what a prop can do. Turning Point prop’s are definitely the best
performing props I have used.”
T. Kohler
“I run a 1850 LS Bayliner
board. Cruise settings (3000 rpm / 32 mph) are extremely quiet and smooth. We can travel all day long on our 30 gallon tank with no fuel worries. Much smoother, efficient, and stable from no wake to WOT than the OEM prop. Made my OEM prop my “spare” prop. Thanks for the great
product.”
P.
Valatie
“In this day and age, most organizations seem to have forgotten about customer service. It is certainly refreshing to find someone who cares about their customer. I just want to say that I appreciate all the effort and I will certainly recommend you to anyone who is looking for a prop.
Thank you for your time and consideration.”
M. Baker
“I’d recommend this product because it increased speed and improved handling and range of trim on my boat. Turning Point was very helpful in getting the right prop for my outboard motor.” Bayliner BassTrophy 18’, Force 125hp, Hustler 17 pitch.
K.
Stockton
“I would recommend Turning Point Propellers because of their versatility and economy. Using their prop and hub system allows me to carry various props for situations and conditions I might come across. They are easily changeable and their reduced weight doesn’t add to my boatload. I found that the prop they sent me out performance the OEM prop.” Tracker Deep V16, Johnson 40hp, Hustler 17 pitch.
J. Fox
“Found it very easy to install. Tested on the
B.
Spokane
“My hole shot was slightly faster. I got 29-30 mph @ 4800rpm, factory prop 5000rpm for this speed. I am leaving the prop on, I feel it is a good prop.” Alumicraft 17’, Mercury 60hp, Hustler 13 pitch.
J.
“The propeller increased the overall speed of my boat by an average of 6.12%. Getting up on plane was generally quicker. In shallow water the climb out was smoother with less tendency to fall back and bottom out.” ActionCraft Flatsmaster, Evinrude 115hp, Hustler 19 pitch.
B. Spillers
“The Turning Point Hustler beat my stock propeller hands down. I gained 5 mph on the top end, and my hole shot was much quicker. It held up well. I highly recommend this product because of its durability and lightweight. I have already suggested this product to several of my fishing buddies.”
K.
Parkman
“This is an excellent prop for all situations. I like the idea of having a couple props in my boat and using only one hub kit. The performance was unbeatable.” Nitro 180TF, Mercury 150hp, Hustler 23 pitch.
T.
“Installed easily and ran smooth. Very fast to plane the boat, smooth and well balanced.” Sea Star 16’, Mercury 85hp, Hustler 19 pitch.
R.
Rogers
“The Hustler gave me better speed and fuel economy than my old stainless prop. Installation was simple. Thanks for the opportunity to test this great prop.” Stratos Fish & Ski 17’-9”, Johnson 150hp, Hustler 21 pitch.
A.
Bloomington
“I found that in waves the ride was smoother and the boat handled better. I would recommend this propeller to all fellow club members and it is a good value for the price.” SeaNymph 16’, Johnson 60hp, Hustler 15 pitch.
E.
Nanticoke
“I like this propeller because if you hit an object while trolling, you don’t have to buy a complete new prop.” Crestline 18’, Johnson 120hp, Hustler 19 pitch.
D. Sample
“I would recommend the Turning Point Propeller because the MasterGuard interchangeable hub allow you to use the same hub for other Turning Point housings of different pitch. The propeller is reasonably priced. Making it affordable to carry a spare.” Basstracker 175, Mercury 60hp, Hustler
14 pitch.
Tim Hugg
JUST WANTED TO TELL YOU GUYS WHAT A GREAT PROP YOU MAKE. I HAVE BEEN GOING CRAZY TRYING TO FIND A PROP THAT GETS MY 140HP JOHNSON 4 STROKE IN THE
THANK YOU.
2005 MANITOU OSPREY PRO SERIES 24 FOOT PONTOON BOAT
Friday, June 15, 2007
Boat Propeller Reviews
These are testimonials left from boaters that have used a boat propeller from Turning Point Propellers. Turning Point manufacturers High Performance aluminum and steel boat propellers. You find them on sale at www.ebuyersworld.com.
B. Bessent.
Wow! It seems like a new boat! The old prop pushed the boat through the water like it was mud. I never could pull a skier. The new (Turning Point) prop pulled two skiers like nothing."
Bayliner 16’
Force 70hp, Hustler 15 pitch propeller
L. Miller.
The hole shot seems much better than the factory prop. Holds well in turns and is easy to install. Appears very sturdy & well designed with bigger than factory blades. I would choose this prop over the factory prop. I will leave this prop on my boat and use the factory prop as a spare.
Starcraft 16
Mercury 60 EFI, Hustler 14 pitch
R. Hanson.
“I was very impressed with the torque I felt with the Turning Point prop. The increase in power and smoothness was very noticeable. Easy installation. Great in turns, a lot better than the stock prop."
SmokerCraft 17
Johnson 115, Hustler 19 pitch
P. Bologna.
“The holding with the Turning Point prop is awesome!"
G3, Yamaha 90hp, Hustler 17 pitch
M. Gelfond.
“Having worked in the tool and dye industry for the past 25 years, I must say that this prop is one of the finest quality."
SeaRay 17, Mercruiser, Hustler 17 pitch
A. Rognervo.
"The Turning Point Hustler prop felt solid throughout the performance test. I'd say it compares favorably with my stainless steel prop. I did experience a bit of speed loss, however no speed loss with an additional passenger. I did get to plane faster with the test (Hustler) prop."
Hustler 17 pitch
D. Scheunemann.
"Turning Point test prop: planed the boat quicker with a faster hole shot. This is a very good prop."
Alumnacraft 163, Mercury 60, Hustler 14 pitch
J. Hedstrom.
"The boat feels like a bullet with the Turning Point prop. It's a higher, drier ride."
N. Treida. Flower Mound, TX
”The Turning Point prop put the boat on plane faster than my stainless steel prop. Top speed/rpm was identical, but I got there faster with the Turning Point prop! I definetely recommend this prop."
Sylvan 16, Yamaha 55hp
Hustler 13 pitch propeller
D. Tomlinson.
“I was extremely satisfied with the performance of the prop. My standard Merc prop will now become my backup prop. I have already told 3 boaters of these results, they were also impressed. I also made a third run with another person in the boat and the boat still ran 45 mph @ 5200 rpm's. “
Lund Pro Sport 17, Mercury 115, Hustler 19 pitch
New Jersey
"I am a customer who you recently bought a used Hustler Propeller 23 pitch, going to
Reason, for writing you this e-mail is two -fold.
(1) The propellers work as per your companies claims and are a real value. Customer service and support, top notch.
(2) I wish a big retailer would start carrying these props, WEST Marine, BOAT US. Boaters World, made a big mistake by dropping your line.
Please, feel free to pass this message onto any buyer who may not feel that your props live up to your company claims. I have a perfect example of the average boat most people own and the advantage of this prop, value and performance.
Boat: 1998 Four Winns RS ( 18ft sport model)
Engine: 5.0 Volvo ( 220 H.P.)
Outdrive: Volvo SX
With standard OMC prop: 23 pitch topped out @ 49 MPH ( W.O.T.)
With Hustler Aluminum 23 pitch tops out @ 56 MPH ( W.O.T.)
The boat gets on plane faster and definitely feel the boat pulling much harder out of the hole. I am sure this is because of the cupped blades. Turning, on a dime. OMC, could not hold into a turn like this prop.
I use my boat in a river, that drops into bay and eventually leads out to the ocean where I go as far as 10 miles outside. This is
Keep up the good work guys. Love your product and great service."
K. Keist
“You might be interested to know that my time to plane is definitely shorter with a noticeable decrease in the amount of bow rise. To top it off I’ve seen top speeds I can’t even believe. It was 43.7 mph with and with the Hustler it is now 48.9 mph. This is definitely a High Performance Aluminum propeller, the likes of which I’m surprised someone has not come up with before now.”
G.
Dayton
“After ordering and installing Turning Point’s hub and prop on my 1995 outboard motor, I compared it to the original prop. I not only gained 3 mph top end speed, but it was also quicker to get on plane. It is a very good-looking unit and very easy to install. I bought a second prop to use
as a spare. Both the hub and prop cost me about $62.00 less than the original prop.”
K.
“The Express prop I bought completely outperformed my OEM prop. My hole shot improved and the top speed was faster by about 3 mph. I couldn’t believe how well it handled on turns.”
S. Graham
“The 23 pitch Hustler aluminum prop was outstanding in both the hole shot and top end speed. I was amazed that a prop could perform like it did.”
D. Banach.
“Just thought I would relate my experience with the HU1421A propeller as you recommended for my 2000 Marada 184 DLX with 3.0 Mercruiser versus my original propeller. The biggest difference I noticed was at cruising RPM of 3500 with the old prop boat speed was 26 mph and
with the Hustler the speed is now 31 mph.”
E. Dye
“I bought a SpeedZone prop and think it is the best money can buy. I have been fishing in bass tournaments as a professional for over 10 years and have been running performance bass boats for at least 15 years and I know what a prop can do. Turning Point prop’s are definitely the best
performing props I have used.”
T. Kohler
“I run a 1850 LS Bayliner
board. Cruise settings (3000 rpm / 32 mph) are extremely quiet and smooth. We can travel all day long on our 30 gallon tank with no fuel worries. Much smoother, efficient, and stable from no wake to WOT than the OEM prop. Made my OEM prop my “spare” prop. Thanks for the great
product.”
P.
Valatie
“In this day and age, most organizations seem to have forgotten about customer service. It is certainly refreshing to find someone who cares about their customer. I just want to say that I appreciate all the effort and I will certainly recommend you to anyone who is looking for a prop.
Thank you for your time and consideration.”
M. Baker
“I’d recommend this product because it increased speed and improved handling and range of trim on my boat. Turning Point was very helpful in getting the right prop for my outboard motor.” Bayliner BassTrophy 18’, Force 125hp, Hustler 17 pitch.
K.
Stockton
“I would recommend Turning Point Propellers because of their versatility and economy. Using their prop and hub system allows me to carry various props for situations and conditions I might come across. They are easily changeable and their reduced weight doesn’t add to my boatload. I found that the prop they sent me out performance the OEM prop.” Tracker Deep V16, Johnson 40hp, Hustler 17 pitch.
J. Fox
“Found it very easy to install. Tested on the
B.
Spokane
“My hole shot was slightly faster. I got 29-30 mph @ 4800rpm, factory prop 5000rpm for this speed. I am leaving the prop on, I feel it is a good prop.” Alumicraft 17’, Mercury 60hp, Hustler 13 pitch.
J.
“The propeller increased the overall speed of my boat by an average of 6.12%. Getting up on plane was generally quicker. In shallow water the climb out was smoother with less tendency to fall back and bottom out.” ActionCraft Flatsmaster, Evinrude 115hp, Hustler 19 pitch.
B. Spillers
“The Turning Point Hustler beat my stock propeller hands down. I gained 5 mph on the top end, and my hole shot was much quicker. It held up well. I highly recommend this product because of its durability and lightweight. I have already suggested this product to several of my fishing buddies.”
K.
Parkman
“This is an excellent prop for all situations. I like the idea of having a couple props in my boat and using only one hub kit. The performance was unbeatable.” Nitro 180TF, Mercury 150hp, Hustler 23 pitch.
T.
“Installed easily and ran smooth. Very fast to plane the boat, smooth and well balanced.” Sea Star 16’, Mercury 85hp, Hustler 19 pitch.
R.
Rogers
“The Hustler gave me better speed and fuel economy than my old stainless prop. Installation was simple. Thanks for the opportunity to test this great prop.” Stratos Fish & Ski 17’-9”, Johnson 150hp, Hustler 21 pitch.
A.
Bloomington
“I found that in waves the ride was smoother and the boat handled better. I would recommend this propeller to all fellow club members and it is a good value for the price.” SeaNymph 16’, Johnson 60hp, Hustler 15 pitch.
E.
Nanticoke
“I like this propeller because if you hit an object while trolling, you don’t have to buy a complete new prop.” Crestline 18’, Johnson 120hp, Hustler 19 pitch.
D. Sample
“I would recommend the Turning Point Propeller because the MasterGuard interchangeable hub allow you to use the same hub for other Turning Point housings of different pitch. The propeller is reasonably priced. Making it affordable to carry a spare.” Basstracker 175, Mercury 60hp, Hustler
14 pitch.
Tim Hugg
JUST WANTED TO TELL YOU GUYS WHAT A GREAT PROP YOU MAKE. I HAVE BEEN GOING CRAZY TRYING TO FIND A PROP THAT GETS MY 140HP JOHNSON 4 STROKE IN THE
THANK YOU.
2005 MANITOU OSPREY PRO SERIES 24 FOOT PONTOON BOAT
See www.ebuyersworld.com for great specials on Nauticus Smart Tabs trim tabs
Saturday, June 9, 2007
Stainless steel propeller performance for the cost of aluminum
Turning Point's Hustler Aluminum Propellers deliver outstanding overall performance that you would find in a stainless steel propeller - but for the low cost of aluminum.
Hustler High Performance Aluminum Boat Propellers
Mid-Range & High Performance Series
40 - 300 hp w/ 4-1/4" & 4-3/4" gearcases
They incorporate designs that boost a boat's overall performance. Not all boat propellers are created equal. In fact, Hustler Aluminum Propellers are the best performing props available. In some cases, this prop will outperform a stainless steel propeller!
Turning Point's Hustler High Performance Series aluminum propellers now feature the newly designed MasterGuard Hub System. Created specifically to give boats a higher top-end speed, better handling, a faster hole shot and more efficiency, Hustler propellers maximize overall performance. These props incorporate the same high performance designs found in stainless steel props to give boaters a less expensive way to gain stainless steel-like performance.
The High Performance Series is designed for all engines ranging from 40 hp to 300 hp with 4-1/4" to 4-3/4" gearcases. The interchangeable hub allows boaters to save money on future prop purchases, since spare or different pitched propellers don't require another hub purchase.
Turning Point recommends that every boat have a spare propeller onboard to insure a day on the water isn't ruined by a broken prop or to allow for adjustments in different situations. Using a prop 2" in pitch less makes a big difference when more people are onboard or the boat is being used for watersports. The smaller pitch helps offset the added weight and drag on the motor and increases performance under these circumstances.
Do you use your boat for waterskiing, tubing, or putting extra people on board for a cruise around the lake or down the river? Purchase a 2nd Hustler boat propeller at a lower pitch to help compensate for the added weight and drag. The second prop will adapt to the same hub! You will notice a big improvement in how your boat performs under those conditions.
Hustler High Performance Aluminum Boat Propellers
Mid-Range & High Performance Series
40 - 300 hp w/ 4-1/4" & 4-3/4" gearcases
They incorporate designs that boost a boat's overall performance. Not all boat propellers are created equal. In fact, Hustler Aluminum Propellers are the best performing props available. In some cases, this prop will outperform a stainless steel propeller!
Turning Point's Hustler High Performance Series aluminum propellers now feature the newly designed MasterGuard Hub System. Created specifically to give boats a higher top-end speed, better handling, a faster hole shot and more efficiency, Hustler propellers maximize overall performance. These props incorporate the same high performance designs found in stainless steel props to give boaters a less expensive way to gain stainless steel-like performance.
The High Performance Series is designed for all engines ranging from 40 hp to 300 hp with 4-1/4" to 4-3/4" gearcases. The interchangeable hub allows boaters to save money on future prop purchases, since spare or different pitched propellers don't require another hub purchase.
Turning Point recommends that every boat have a spare propeller onboard to insure a day on the water isn't ruined by a broken prop or to allow for adjustments in different situations. Using a prop 2" in pitch less makes a big difference when more people are onboard or the boat is being used for watersports. The smaller pitch helps offset the added weight and drag on the motor and increases performance under these circumstances.
Mid-Range Series
40 - 75hp w/ a 3-1/2" gearcase
New designs, better speeds, better handling, and saves fuel. The best propellers for lower horspower pontoon, fishing and work boats!
|
High Performance series
40 - 300hp w/ 4-1/4" and 4-3/4" gearcases
Patterned from after stainless steel designs, these props give a new meaning to the word hustle. Hustler aluminum props provide high top end speeds, quick hole shot, great lift, and secure handling even on tight WOT Turns.
The best overall running aluminum boat propeller available!
| ||||
Do you use your boat for waterskiing, tubing, or putting extra people on board for a cruise around the lake or down the river? Purchase a 2nd Hustler boat propeller at a lower pitch to help compensate for the added weight and drag. The second prop will adapt to the same hub! You will notice a big improvement in how your boat performs under those conditions.
Boat: | Aquasport 175 | ||||
Motor: | Johnson 90 | ||||
Engine WOT Range: | 4500-5500 | ||||
| Propeller | Top Speed | WOT RPM | Handling | ||
| Hustler® 17 pitch | 36.0 | 5400 | 4 | ||
| Mercury® 17 pitch | 35.7 | 5375 | 3 | ||
| OMC® 17 pitch | 35.7 | 5600 | 4 | ||
| Solas® 17 pitch | 35.7 | 5500 | 3 | ||
| Michigan Wheel® 17 pitch | 35.3 | 5500 | 2 | ||
Boat: | Sea Ray 240 | ||||
Motor: | MerCruiser® 7.4L Bravo One | ||||
Engine WOT Range: | 4200-4600 | ||||
| Prop | Top Speed | WOT RPM | Handling | ||
| Hustler® 21 pitch | 45.9 | 4537 | 5 | ||
| Solas® 21 pitch | 44.9 | 4400 | 5 | ||
| Mercury® 21 pitch | 43.8 | 4700 | 3 | ||
| Michigan Wheel® 21 pitch | 41.9 | 4525 | 0 | ||
| Handling Score | |||||
(Best) 5 | Prop holds throughout the turns. | ||||
4 | Ventilate after apex of the turns. | ||||
(Acceptable) 3 | Ventilates at apex of the turns. | ||||
2 | Light ventilation throughout the turns. | ||||
1 | Excess ventilation through out the turns and after the turns. | ||||
| 0 | Blow out, can't turn at all. Need to back off the throttle. | ||||
| All trademarks are the property of their respective owners | |||||
Subscribe to:
Posts (Atom)